§ 1026.37 Content of disclosures for certain mortgage transactions (Loan Estimate).

For each transaction subject to § 1026.19(e), the creditor shall disclose the information in this section:

(a) General information

(1) Form title. The title of the form, “Loan Estimate,” using that term.

(2) Form purpose. The statement, “Save this Loan Estimate to compare with your Closing Disclosure.”

(3) Creditor. The name and address of the creditor making the disclosures.

1. Multiple creditors. For transactions with multiple creditors, see § 1026.17(d) and comment 17(d)-1 for further guidance. The creditor making the disclosures, however, must be identified as the creditor for purposes of § 1026.37(a)(3).

2. Mortgage broker as loan originator. In transactions involving a mortgage broker, the name and address of the creditor must be disclosed, if known, even if the mortgage broker provides the disclosures to the consumer under § 1026.19(e)(1)(ii). As required by § 1026.19(e)(1)(i), the mortgage broker must make a good faith effort to disclose the name and address of the creditor, but if the name of the creditor is not yet known, the disclosure required by § 1026.37(a)(3) may be left blank. See comment 37-1.

(4) Date issued. The date the disclosures are mailed or delivered to the consumer by the creditor, labeled “Date Issued.”

1. Applicable date. Section 1026.37(a)(4) requires disclosure of the date the creditor mails or delivers the Loan Estimate to the consumer. The creditor's method of delivery does not affect the date issued. For example, if the creditor hand delivers the Loan Estimate to the consumer on August 14, or if the creditor places the Loan Estimate in the mail on August 14, the date disclosed under § 1026.37(a)(4) is August 14.

2. Mortgage broker as loan originator. In transactions involving a mortgage broker, the date disclosed is the date the mortgage broker mails or delivers the Loan Estimate to the consumer, because pursuant to § 1026.19(e)(1)(ii), the mortgage broker is required to comply with all relevant requirements of § 1026.19(e).

(5) Applicants. The name and mailing address of the consumer(s) applying for the credit, labeled “Applicants.”

1. Multiple consumers. If there is more than one consumer applying for the credit, § 1026.37(a)(5) requires disclosure of the name and the mailing address of each consumer to whom the Loan Estimate will be delivered. If the names and mailing addresses of all consumers applying for the credit do not fit in the space allocated on the Loan Estimate, an additional page with that information may be appended to the end of the form. For additional information on permissible changes, see § 1026.37(o)(5) and its commentary.

(6) Property. The address including the zip code of the property that secures or will secure the transaction, or if the address is unavailable, the location of such property including a zip code, labeled “Property.”

1. Alternate property address. Section 1026.37(a)(6) requires disclosure of the address including the zip code of the property that secures or will secure the transaction. A creditor complies with § 1026.37(a)(6) by disclosing a complete address for purposes of the U.S. Postal Service. If the address is unavailable, a creditor complies with § 1026.37(a)(6) by disclosing the location of such property including a zip code, which is required in all instances. Location of the property under § 1026.37(a)(6) includes location information, such as a lot number. The disclosure of multiple zip codes is permitted if the consumer is investigating home purchase opportunities in multiple zip codes.

2. Personal property. Where personal property also secures the credit transaction, a description of that property may be disclosed, at the creditor's option pursuant to § 1026.37(a)(6), if a description fits in the space provided on form H-24 for the disclosure required by § 1026.37(a)(6). An additional page may not be appended to the form to disclose a description of personal property.

3. Multiple properties. Where more than one property secures the credit transaction, § 1026.37(a)(6) requires disclosure of all properties. If the addresses of all properties securing the transaction do not fit in the space allocated on the Loan Estimate, an additional page with that information with respect to real properties may be appended to the end of the form.

(7) Sale price.

1. Estimated property value. In transactions where there is no seller, such as in a refinancing, § 1026.37(a)(7)(ii) requires the creditor to disclose the estimated value of the property identified in § 1026.37(a)(6) based on the best information reasonably available to the creditor at the time the disclosure is provided to the consumer, which may include, at the creditor's option, the estimated value of the improvements to be made on the property in transactions involving construction. The creditor may use the estimate provided by the consumer at application unless it has performed its own estimate of the property value by the time the disclosure is provided to the consumer, in which case the creditor must use its own estimate. If the creditor has obtained any appraisals or valuations of the property for the application at the time the disclosure is issued to the consumer, the value determined by the appraisal or valuation to be used during underwriting for the application is disclosed as the estimated property value. If the creditor has obtained multiple appraisals or valuations and has not yet determined which one will be used during underwriting, it may disclose the value from any appraisal or valuation it reasonably believes it may use in underwriting the transaction. In a transaction that involves a seller, if the sale price is not yet known, the creditor complies with § 1026.37(a)(7) if it discloses the estimated value of the property that it used as the basis for the disclosures in the Loan Estimate.

2. Personal property. In transactions involving personal property that is separately valued from real property, only the value of the real property or cooperative unit is disclosed under § 1026.37(a)(7). Where personal property is included in the sale price of the real property or cooperative unit (for example, if the consumer is purchasing the furniture inside the dwelling), however, § 1026.37(a)(7) permits disclosure of the aggregate price without any reduction for the appraised or estimated value of the personal property.

(i) For transactions that involve a seller, the contract sale price of the property identified in paragraph (a)(6) of this section, labeled “Sale Price.”

(ii) For transactions that do not involve a seller, the estimated value of the property identified in paragraph (a)(6), labeled “Prop. Value.”

(8) Loan term. The term to maturity of the credit transaction, stated in years or months, or both, as applicable, labeled “Loan Term.”

1. Partial years.

i. Terms to maturity of 24 months or more. Section 1026.37(a)(8) requires disclosure of the term to maturity in years, or months, or both, as applicable. Where the term exceeds 24 months and equals a whole number of years, a creditor complies with § 1026.37(a)(8) by disclosing the number of years, followed by the designation “years.” Where the term exceeds 24 months but does not equal a whole number of years, a creditor complies with § 1026.37(a)(8) by disclosing the term to maturity as the number of years followed by the designation “yr.” and the remaining number of months, followed by the designation “mo.” For example, if the term to maturity of the transaction is 185 months, the correct disclosure would be “15 yr. 5 mo.”

ii. Terms to maturity of less than 24 months. If the term to maturity is less than 24 months and does not equal a whole number of years, a creditor complies with § 1026.37(a)(8) by disclosing the number of months only, followed by the designation “mo.” For example, if the term to maturity of a transaction is six months or 16 months, it would be disclosed as “6 mo.” or “16 mo.,” respectively. If the term to maturity is 12 months, however it would be disclosed simply as “1 year.”

2. Adjustable loan term. Section 1026.37(a)(8) requires disclosure of the term to maturity of the credit transaction. If the term to maturity is adjustable, i.e., it is not known with certainty at consummation, the creditor complies with § 1026.37(a)(8), if it discloses the possible range of the loan term, including the maximum number of years possible under the terms of the legal obligation. For example, if the loan term depends on the value of interest rate adjustments during the term of the loan, to calculate the maximum loan term, the creditor assumes that the interest rate rises as rapidly as possible after consummation, taking into account the terms of the legal obligation, including any applicable caps on interest rate adjustments and lifetime interest rate cap.

3. Loan term start date. See comment app. D-7.i for an explanation of how a creditor discloses the loan term of a multiple-advance loan to finance the construction of a dwelling that may be permanently financed by the same creditor.

(9) Purpose. The consumer's intended use for the credit, labeled “Purpose,” using one of the following terms:

1. General. Section 1026.37(a)(9) requires disclosure of the consumer's intended use of the credit. In ascertaining the consumer's intended use, § 1026.37(a)(9) requires the creditor to consider all relevant information known to the creditor at the time of the disclosure. If the purpose is not known, the creditor may rely on the consumer's stated purpose. The following examples illustrate when each of the permissible purposes should be disclosed:

i. Purchase. The consumer intends to use the proceeds from the transaction to purchase the property that will secure the extension of credit. In a purchase transaction with simultaneous subordinate financing, the simultaneous subordinate loan is also disclosed with the purpose “Purchase.”

ii. Refinance. The consumer refinances an existing obligation already secured by the consumer's dwelling to change the rate, term, or other loan features and may or may not receive cash from the transaction. For example, in a refinance with no cash provided, the new amount financed does not exceed the unpaid principal balance, any earned unpaid finance charge on the existing debt, and amounts attributed solely to the costs of the refinancing. Conversely, in a refinance with cash provided, the consumer refinances an existing mortgage obligation and receives money from the transaction that is in addition to the funds used to pay the unpaid principal balance, any earned unpaid finance charge on the existing debt, and amounts attributed solely to the costs of the refinancing. In such a transaction, the consumer may, for example, use the newly-extended credit to pay off the balance of the existing mortgage and other consumer debt, such as a credit card balance.

iii. Construction. Section 1026.37(a)(9)(iii) requires the creditor to disclose that the loan is for construction in transactions where the creditor extends credit to finance only the cost of initial construction (construction-only loan), not renovations to existing dwellings, and in transactions where a multiple advance loan may be permanently financed by the same creditor (construction-permanent loan). In a construction-only loan, the borrower may be required to make interest-only payments during the loan term with the balance commonly due at the end of the construction project. For additional guidance on disclosing construction-permanent loans, see § 1026.17(c)(6)(ii), comments 17(c)(6)-2, -3, and -5, and appendix D to this part.

iv. Home equity loan. The creditor is required to disclose that the credit is for a “home equity loan” if the creditor intends to extend credit for any purpose other than a purchase, refinancing, or construction. This disclosure applies whether the loan is secured by a first or subordinate lien.

2. Refinance coverage. The disclosure requirements under § 1026.37(a)(9)(ii) apply to credit transactions that meet the definition of a refinancing under § 1026.20(a) but without regard to whether they are made by a creditor, holder, or servicer of the existing obligation. Section 1026.20(a) applies only to refinancings undertaken by the original creditor or a holder or servicer of the original debt. See comment 20(a)-5.

(i) Purchase. If the credit is to finance the acquisition of the property identified in paragraph (a)(6) of this section, the creditor shall disclose that the loan is for a “Purchase.”

(ii) Refinance. If the credit is not for the purpose described in paragraph (a)(9)(i) of this section, and if the credit will be used to refinance an existing obligation, as defined in § 1026.20(a) (but without regard to whether the creditor is the original creditor or a holder or servicer of the original obligation), that is secured by the property identified in paragraph (a)(6) of this section, the creditor shall disclose that the loan is for a “Refinance.”

(iii) Construction. If the credit is not for one of the purposes described in paragraphs (a)(9)(i) or (ii) of this section and the credit will be used to finance the initial construction of a dwelling on the property identified in paragraph (a)(6) of this section, the creditor shall disclose that the loan is for “Construction.”

(iv) Home equity loan. If the credit is not for one of the purposes described in paragraphs (a)(9)(i) through (iii) of this section, the creditor shall disclose that the loan is a “Home Equity Loan.”

(10) Product. A description of the loan product, labeled “Product.”

1. No features. If the loan product disclosed pursuant to § 1026.37(a)(10) does not include any of the features described in § 1026.37(a)(10)(ii), only the product type and introductory and first adjustment periods, if applicable, are disclosed. For example:

i. Adjustable rate. When disclosing an adjustable rate product, the disclosure of the loan product must be preceded by the length of the introductory period and the frequency of the first adjustment period thereafter. Thus, for example, if the loan product is an adjustable rate with an introductory rate that is fixed for the first five years of the loan term and then adjusts every three years starting in year six, the disclosure required by § 1026.37(a)(10) is “5/3 Adjustable Rate.” If the first adjustment period is not the period for all adjustments under the terms of the legal obligation, the creditor should still disclose the initial adjustment period and should not disclose other adjustment periods. For example, if the loan product is an adjustable rate with an introductory rate that is fixed for the first five years of the loan term and then adjusts every three years starting in year six, and then annually starting in year fifteen, the disclosure required by § 1026.37(a)(10) would still be “5/3 Adjustable Rate.”

A. No introductory period. If the loan product is an adjustable rate with no introductory rate, the creditor should disclose “0” where the introductory rate period would ordinarily be disclosed. For example, if the loan product is an adjustable rate that adjusts every three years with no introductory period, the disclosure required by § 1026.37(a)(10) is “0/3 Adjustable Rate.”

B. Introductory period not yet known. If the loan product is an adjustable rate with an introductory period that is not yet known at the time of delivery of the Loan Estimate, the creditor should disclose the shortest potential introductory period for the particular loan product offered. For example, if the loan product is an adjustable rate with an introductory period that may be between 36 and 48 months and the rate would then adjust every year, the disclosure required by § 1026.37(a)(10) is “3/1 Adjustable Rate.”

ii. Step rate. If the loan product is a step rate with an introductory interest rate that lasts for ten years and adjusts every year thereafter for the next five years, and then adjusts every three years for the next 15 years, the disclosure required by § 1026.37(a)(10) is “10/1 Step Rate.” If the loan product is a step rate with no introductory rate, the creditor should disclose “0” where the introductory rate period would ordinarily be disclosed.

iii. Fixed rate. If the loan product is not an adjustable rate or a step rate, as described in § 1026.37(a)(10)(i)(A) and (B), even if an additional feature described in § 1026.37(a)(10)(ii) may change the consumer's periodic payment, the disclosure required by § 1026.37(a)(10)(i) is “Fixed Rate.”

2. Additional features. When disclosing a loan product with at least one of the features described in § 1026.37(a)(10)(ii), § 1026.37(a)(10)(iii) and (iv) require the disclosure of only the first applicable feature in the order of § 1026.37(a)(10)(ii) and that it be preceded by the time period or the length of the introductory period and the frequency of the first adjustment period, as applicable, followed by a description of the loan product and its time period as provided for in § 1026.37(a)(10)(i). For example:

i. Negative amortization. Some loan products, such as “payment option” loans, permit the borrower to make payments that are insufficient to cover all of the interest accrued, and the unpaid interest is added to the principal balance. Where the loan product includes a loan feature that may cause the loan balance to increase, the disclosure required by § 1026.37(a)(10)(ii)(A) is preceded by the time period that the borrower is permitted to make payments that result in negative amortization (e.g., “2 Year Negative Amortization”), followed by the loan product type. Thus, a fixed rate product with a step-payment feature for the first two years of the legal obligation that may negatively amortize is disclosed as “2 Year Negative Amortization, Fixed Rate.”

ii. Interest only. When disclosing an “Interest Only” feature, as defined in § 1026.18(s)(7)(iv), the applicable time period must precede the label “Interest Only.” Thus, a fixed rate loan with only interest due for the first five years of the loan term is disclosed as “5 Year Interest Only, Fixed Rate.” If the interest only feature fails to cover the total interest due, then, as required by § 1026.37(a)(10)(iii), the disclosure must reference the negative amortization feature and not the interest only feature (e.g., “5 Year Negative Amortization, Fixed Rate”). See comment app. D-7.ii for an explanation of the disclosure of the time period of an interest only feature for a construction loan or a construction-permanent loan.

iii. Step payment. When disclosing a step payment feature (which is sometimes referred to instead as a graduated payment), the period of time at the end of which the scheduled payments will change must precede the label “Step Payment” (e.g., “5 Year Step Payment”) followed by the name of the loan product. Thus, a fixed rate mortgage subject to a 5-year step payment plan is disclosed as a “5 Year Step Payment, Fixed Rate.”

iv. Balloon payment. If a loan product includes a “balloon payment,” as that term is defined in § 1026.37(b)(5), the disclosure of the balloon payment feature, including the year the payment is due, precedes the disclosure of the loan product. Thus, if the loan product is a step rate with an introductory rate that lasts for three years and adjusts each year thereafter until the balloon payment is due in the seventh year of the loan term, the disclosure required is “Year 7 Balloon Payment, 3/1 Step Rate.” If the loan product includes more than one balloon payment, only the earliest year that a balloon payment is due shall be disclosed.

v. Seasonal payment. If a loan product includes a seasonal payment feature, § 1026.37(a)(10)(ii)(E) requires that the creditor disclose the feature. The feature is not, however, required to be disclosed with any preceding time period. Disclosure of the label “Seasonal Payment” without any preceding number of years satisfies this requirement.

3. Periods not in whole years.

i. Terms of 24 months or more. For product types and features that have introductory periods or adjustment periods that do not equate to a number of whole years, if the period is a number of months that is 24 or greater and does not equate to a whole number of years, § 1026.37(a)(10) requires disclosure of the whole number of years followed by a decimal point with the remaining months rounded to two places. For example, if the loan product is an adjustable rate with an introductory period of 30 months that adjusts every year thereafter, the creditor would be required to disclose “2.5/1 Adjustable Rate.” If the introductory period were 31 months, the required disclosure would be 2.58/1 Adjustable Rate.”

ii. Terms of less than 24 months. For product types and features that have introductory periods or adjustment periods that do not equate to a number of whole years, if the period is less than 24 months, § 1026.37(a)(10) requires disclosure of the number of months, followed by the designation “mo.” For example, if the product type is an adjustable rate with an 18-month introductory period that adjusts every 18 months starting in the 19th month, the required disclosure would be “18 mo./18mo. Adjustable Rate.”

iii. Adjustments more frequent than monthly. For adjustment periods that change more frequently than monthly, § 1026.37(a)(10) requires disclosure of the applicable unit-period, such as daily, weekly, or bi-weekly. For example, for an adjustable rate construction loan with no introductory fixed rate period where the interest rate adjusts every seven days, the disclosure required by § 1026.37(a)(10) is “0/Weekly Adjustable Rate.”

(i) The description of the loan product shall include one of the following terms:

(A) Adjustable rate. If the interest rate may increase after consummation, but the rates that will apply or the periods for which they will apply are not known at consummation, the creditor shall disclose the loan product as an “Adjustable Rate.”

(B) Step rate. If the interest rate will change after consummation, and the rates that will apply and the periods for which they will apply are known at consummation, the creditor shall disclose the loan product as a “Step Rate.”

(C) Fixed rate. If the loan product is not an Adjustable Rate or a Step Rate, as described in paragraphs (a)(10)(i)(A) and (B) of this section, respectively, the creditor shall disclose the loan product as a “Fixed Rate.”

(ii) The description of the loan product shall include the features that may change the periodic payment using the following terms, subject to paragraph (a)(10)(iii) of this section, as applicable:

(A) Negative amortization. If the principal balance may increase due to the addition of accrued interest to the principal balance, the creditor shall disclose that the loan product has a “Negative Amortization” feature.

(B) Interest only. If one or more regular periodic payments may be applied only to interest accrued and not to the loan principal, the creditor shall disclose that the loan product has an “Interest Only” feature.

(C) Step payment. If scheduled variations in regular periodic payment amounts occur that are not caused by changes to the interest rate during the loan term, the creditor shall disclose that the loan product has a “Step Payment” feature.

(D) Balloon payment. If the terms of the legal obligation include a “balloon payment,” as that term is defined in paragraph (b)(5) of this section, the creditor shall disclose that the loan has a “Balloon Payment” feature.

(E) Seasonal payment. If the terms of the legal obligation expressly provide that regular periodic payments are not scheduled between specified unit-periods on a regular basis, the creditor shall disclose that the loan product has a “Seasonal Payment” feature.

(iii) The disclosure of a loan feature under paragraph (a)(10)(ii) of this section shall precede the disclosure of the loan product under paragraph (a)(10)(i) of this section. If a transaction has more than one of the loan features described in paragraph (a)(10)(ii) of this section, the creditor shall disclose only the first applicable feature in the order the features are listed in paragraph (a)(10)(ii) of this section.

(iv) The disclosures required by paragraphs (a)(10)(i)(A) and (B), and (a)(10)(ii)(A) through (D) of this section must each be preceded by the duration of any introductory rate or payment period, and the first adjustment period, as applicable.

(11) Loan type. The type of loan, labeled “Loan Type,” offered to the consumer using one of the following terms, as applicable:

1. Other. If the transaction is a type other than a conventional, FHA, or VA loan, § 1026.37(a)(11)(iv) requires the creditor to disclose the loan type as “Other” and provide a name or brief description of the loan type. For example, a loan that is guaranteed or funded by the Federal government under the Rural Housing Service (RHS) of the U.S. Department of Agriculture is required to be disclosed under the subcategory “Other.” Section 1026.37(a)(11)(iv) requires a brief description of the loan type (e.g., “RHS”). A loan that is insured or guaranteed by a State agency must also be disclosed as “Other.”

(i) Conventional. If the loan is not guaranteed or insured by a Federal or State government agency, the creditor shall disclose that the loan is a “Conventional.”

(ii) FHA. If the loan is insured by the Federal Housing Administration, the creditor shall disclose that the loan is an “FHA.”

(iii) VA. If the loan is guaranteed by the U.S. Department of Veterans Affairs, the creditor shall disclose that the loan is a “VA.”

(iv) Other. For federally-insured or guaranteed loans other than those described in paragraphs (a)(11)(ii) and (iii) of this section, and for loans insured or guaranteed by a State agency, the creditor shall disclose the loan type as “Other,” and provide a brief description of the loan type.

(12) Loan identification number (Loan ID #). A number that may be used by the creditor, consumer, and other parties to identify the transaction, labeled “Loan ID #.”

1. Unique identifier. Section 1026.37(a)(12) requires that the creditor disclose a loan identification number that may be used by the creditor, consumer, and other parties to identify the transaction, labeled as “Loan ID # .” The loan identification number is determined by the creditor, which number may contain any alpha-numeric characters. Because the number must allow for the identification of the particular credit transaction under § 1026.37(a)(12), a creditor must use a unique loan identification number, i.e., the creditor may not use the same loan identification number for different, but related, loan transactions (such as different loans to the same borrower). Where a creditor issues a revised Loan Estimate for a transaction, the loan identification number must be sufficient to enable identification of the transaction pursuant to § 1026.37(a)(12).

(13) Rate lock. A statement of whether the interest rate disclosed pursuant to paragraph (b)(2) of this section is locked for a specific period of time, labeled “Rate Lock.”

1. Interest rate. For purposes of § 1026.37(a)(13), the interest rate is locked for a specific period of time if the creditor has agreed to extend credit to the consumer at a given rate, subject to contingencies that are described in any rate lock agreement between the creditor and consumer.

2. Expiration date. The disclosure required by § 1026.37(a)(13)(ii) related to estimated closing costs is required regardless of whether the interest rate is locked for a specific period of time or whether the terms and costs are otherwise accepted or extended. If the consumer fails to indicate an intent to proceed with the transaction within 10 business days after the disclosures were originally provided under § 1026.19(e)(1)(iii) (or within any longer time period established by the creditor), then, for determining good faith under § 1026.19(e)(3)(i) and (ii), a creditor may use a revised estimate of a charge instead of the amount originally disclosed under § 1026.19(e)(1)(i). See comment 19(e)(3)(iv)(E)-2.

3. Time zone. The disclosure required by § 1026.37(a)(13) requires the applicable time zone for all times provided, as determined by the creditor. For example, if the creditor is located in New York and determines that the Loan Estimate will expire at 5:00 p.m. in the time zone applicable to its location, while standard time is in effect, the disclosure must include a reference to the Eastern time zone (i.e., 5:00 p.m. EST).

4. Revised disclosures. Once the consumer indicates an intent to proceed within the time specified by the creditor under § 1026.37(a)(13)(ii), the date and time at which estimated closing costs expire are left blank on any subsequent revised disclosures. The creditor may extend the period of availability to expire beyond the time disclosed under § 1026.37(a)(13)(ii). If the consumer indicates an intent to proceed within that longer time period, the date and time at which estimated closing costs expire are left blank on subsequent revised disclosures, if any. See comment 19(e)(3)(iv)-5.

(i) For transactions in which the interest rate is locked for a specific period of time, the creditor must provide the date and time (including the applicable time zone) when that period ends.

(ii) The “Rate Lock” statement required by this paragraph (a)(13) shall be accompanied by a statement that the interest rate, any points, and any lender credits may change unless the interest rate has been locked, and the date and time (including the applicable time zone) at which estimated closing costs expire.

(b) Loan terms. A separate table under the heading “Loan Terms” that contains the following information and that satisfies the following requirements:

1. Legal obligation. The disclosures required by § 1026.37 must reflect good faith estimates of the credit terms to which the parties will be legally bound for the transaction. Accordingly, if certain terms of the transaction are known or reasonably available to the creditor, based on information such as the consumer's selection of a product type or other information in the consumer's application, § 1026.37 requires the creditor to disclose those credit terms. For example, if the consumer selects a product type with a prepayment penalty, § 1026.37(b)(4) requires disclosure of the maximum amount of the prepayment penalty and period in which the prepayment penalty may be charged as known to the creditor at the time the disclosures are provided.

(1) Loan amount. The total amount the consumer will borrow, as reflected by the face amount of the note, labeled “Loan Amount.”

(2) Interest rate. The interest rate that will be applicable to the transaction at consummation, labeled “Interest Rate.” For an adjustable rate transaction, if the interest rate at consummation is not known, the rate disclosed shall be the fully-indexed rate, which, for purposes of this paragraph, means the interest rate calculated using the index value and margin at the time of consummation.

1. Interest rate at consummation not known. Where the interest rate that will apply at consummation is not known at the time the creditor must deliver the disclosures required by § 1026.19(e), § 1026.37(b)(2) requires disclosure of the fully-indexed rate, defined as the index plus the margin at consummation. Although § 1026.37(b)(2) refers to the index plus margin “at consummation,” if the index value that will be in effect at consummation is unknown at the time the disclosures are provided under § 1026.19(e)(1)(iii), i.e., within three business days after receipt of a consumer's application, the fully-indexed rate disclosed under § 1026.37(b)(2) may be based on the index in effect at the time the disclosure is delivered. The index in effect at consummation (or the time the disclosure is delivered under § 1026.19(e)) need not be used if the contract provides for a delay in the implementation of changes in an index value. For example, if the contract specifies that rate changes are based on the index value in effect 45 days before the change date, creditors may use any index value in effect during the 45 days before consummation (or any earlier date of disclosure) in calculating the fully-indexed rate to be disclosed. See comment app. D-7.iii for an explanation of the disclosure of the permanent financing interest rate for a construction-permanent loan.

(3) Principal and interest payment. The initial periodic payment amount that will be due under the terms of the legal obligation, labeled “Principal & Interest,” immediately preceded by the applicable unit-period, and a statement referring to the payment amount that includes any mortgage insurance and escrow payments that is required to be disclosed pursuant to paragraph (c) of this section. If the interest rate at consummation is not known, the amount disclosed shall be calculated using the fully-indexed rate disclosed under paragraph (b)(2) of this section.

1. Frequency of principal and interest payment. Pursuant to § 1026.37(o)(5)(i), if the contract provides for a unit-period, as defined in appendix J to this part, of a month, such as a monthly payment schedule, the payment disclosed under § 1026.37(b)(3) should be labeled “Monthly Principal & Interest.” If the contract requires bi-weekly payments of principal or interest, the payment should be labeled “Bi-Weekly Principal & Interest.” If a creditor voluntarily permits a payment schedule not provided for in the contract, such as an informal principal-reduction arrangement, the disclosure should reflect only the payment frequency provided for in the contract. See § 1026.17(c)(1).

2. Initial periodic payment if not known. Under § 1026.37(b)(3), the initial periodic payment amount that will be due under the terms of the legal obligation must be disclosed. If the initial periodic payment is not known because it will be based on an interest rate at consummation that is not known at the time the disclosures required by § 1026.19(e) must be provided, for example, if it is based on an external index that may fluctuate before consummation, § 1026.37(b)(3) requires that the disclosure be based on the fully-indexed rate disclosed under § 1026.37(b)(2). See comment 37(b)(2)-1 for guidance regarding calculating the fully-indexed rate.

(4) Prepayment penalty. A statement of whether the transaction includes a prepayment penalty, labeled “Prepayment Penalty.” For purposes of this paragraph (b)(4), “prepayment penalty” means a charge imposed for paying all or part of a transaction's principal before the date on which the principal is due, other than a waived, bona fide third-party charge that the creditor imposes if the consumer prepays all of the transaction's principal sooner than 36 months after consummation.

1. Transaction includes a prepayment penalty. Section 1026.37(b)(4) requires disclosure of a statement of whether the transaction includes a prepayment penalty. If the transaction includes a prepayment penalty, § 1026.37(b)(7) sets forth the information that must be disclosed under § 1026.37(b)(4) (i.e., the maximum amount of the prepayment penalty that may be imposed under the terms of the loan contract and the date on which the penalty will no longer be imposed). For an example of such disclosure, see form H-24 of appendix H to this part. The disclosure under § 1026.37(b)(4) applies to transactions where the terms of the loan contract provide for a prepayment penalty, even though the creditor does not know at the time of the disclosure whether the consumer will, in fact, make a payment to the creditor that would cause imposition of the penalty. For example, if the monthly interest accrual amortization method described in comment 37(b)(4)-2.i is used such that interest is assessed on the balance for a full month even if the consumer makes a full prepayment before the end of the month, the transaction includes a prepayment penalty that must be disclosed pursuant to § 1026.37(b)(4).

2. Examples of prepayment penalties. For purposes of § 1026.37(b)(4), the following are examples of prepayment penalties:

i. A charge determined by treating the loan balance as outstanding for a period of time after prepayment in full and applying the interest rate to such “balance,” even if the charge results from interest accrual amortization used for other payments in the transaction under the terms of the loan contract. “Interest accrual amortization” refers to the method by which the amount of interest due for each period (e.g., month) in a transaction's term is determined. For example, “monthly interest accrual amortization” treats each payment as made on the scheduled, monthly due date even if it is actually paid early or late (until the expiration of any grace period). Thus, under the terms of a loan contract providing for monthly interest accrual amortization, if the amount of interest due on May 1 for the preceding month of April is $3,000, the loan contract will require payment of $3,000 in interest for the month of April whether the payment is made on April 20, on May 1, or on May 10. In this example, if the consumer prepays the loan in full on April 20 and if the accrued interest as of that date is $2,000, then assessment of a charge of $3,000 constitutes a prepayment penalty of $1,000 because the amount of interest actually earned through April 20 is only $2,000.

ii. A fee, such as an origination or other loan closing cost, that is waived by the creditor on the condition that the consumer does not prepay the loan. See comment 37(b)(4)-3.iii below for additional guidance regarding waived bona fide third-party charges imposed by the creditor if the consumer pays all of a covered transaction's principal before the date on which the principal is due sooner than 36 months after consummation.

iii. A minimum finance charge in a simple interest transaction.

iv. Computing a refund of unearned interest by a method that is less favorable to the consumer than the actuarial method, as defined by section 933(d) of the Housing and Community Development Act of 1992, 15 U.S.C. 1615(d). For purposes of computing a refund of unearned interest, if using the actuarial method defined by applicable State law results in a refund that is greater than the refund calculated by using the method described in section 933(d) of the Housing and Community Development Act of 1992, creditors should use the State law definition in determining if a refund is a prepayment penalty.

3. Fees that are not prepayment penalties. For purposes of § 1026.37(b)(4), fees that are not prepayment penalties include, for example:

i. Fees imposed for preparing and providing documents when a loan is paid in full, if such fees are imposed whether or not the loan is prepaid. Examples include a loan payoff statement, a reconveyance document, or another document releasing the creditor's security interest in the dwelling that secures the loan.

ii. Loan guarantee fees.

iii. A waived bona fide third-party charge imposed by the creditor if the consumer pays all of a covered transaction's principal before the date on which the principal is due sooner than 36 months after consummation. For example, assume that at consummation, the creditor waives $3,000 in closing costs to cover bona fide third-party charges but the terms of the loan agreement provide that the creditor may recoup the $3,000 in waived charges if the consumer repays the entire loan balance sooner than 36 months after consummation. The $3,000 charge is not a prepayment penalty. In contrast, for example, assume that at consummation, the creditor waives $3,000 in closing costs to cover bona fide third-party charges but the terms of the loan agreement provide that the creditor may recoup $4,500 in part to recoup waived charges, if the consumer repays the entire loan balance sooner than 36 months after consummation. The $3,000 that the creditor may impose to cover the waived bona fide third-party charges is not a prepayment penalty, but the additional $1,500 charge is a prepayment penalty and must be disclosed pursuant to § 1026.37(b)(4).

4. Rebate of finance charge. For an obligation that includes a finance charge that does not take into account each reduction in the principal balance of the obligation, the disclosure under § 1026.37(b)(4) reflects whether or not the consumer is entitled to a rebate of any finance charge if the obligation is prepaid in full or part. Finance charges that do not take into account each reduction in the principal balance of an obligation may include precomputed finance charges. If any portion of an unearned precomputed finance charge will not be provided as a rebate upon full prepayment, the disclosure required by § 1026.37(b)(4) will be an affirmative answer, indicate the maximum amount of such precomputed finance charge that may not be provided as a rebate to the consumer upon any prepayment, and state when the period during which a full rebate would not be provided terminates, as required by § 1026.37(b)(7). If, instead, there will be a full rebate of the precomputed finance charge and no other prepayment penalty imposed on the consumer, to comply with the requirements of § 1026.37(b)(4) and (7), the creditor states a negative answer only. If the transaction involves both a precomputed finance charge and a finance charge computed by application of a rate to an unpaid balance, disclosure about both the entitlement to any rebate of the finance charge upon prepayment and any other prepayment penalty are made as one disclosure under § 1026.37(b)(4), stating one affirmative or negative answer and an aggregated amount and time period for the information required by § 1026.37(b)(7). For example, if in such a transaction, a portion of the precomputed finance charge will not be provided as a rebate and the loan contract also provides for a prepayment penalty based on the amount prepaid, both disclosures are made under § 1026.37(b)(4) as one aggregate amount, stating the maximum amount and time period under § 1026.37(b)(7). If the transaction instead provides a rebate of the precomputed finance charge upon prepayment, but imposes a prepayment penalty based on the amount prepaid, to comply with § 1026.37(b)(4), the creditor states an affirmative answer and the information about the prepayment penalty, as required by § 1026.37(b)(7). For further guidance and examples of these types of charges, see comment 18(k)(2)-1. For analogous guidance, see comment 18(k)-2. For further guidance on prepaid finance charges generally, see comment 18(k)-3.

5. Additional guidance. For additional guidance generally on disclosure of prepayment penalties, see comment 18(k)-1.

(5) Balloon payment. A statement of whether the transaction includes a balloon payment, labeled “Balloon Payment.” For purposes of this paragraph (b)(5), “balloon payment” means a payment that is more than two times a regular periodic payment. “Balloon payment” includes the payment or payments under a transaction that requires only one or two payments during the loan term.

1. Regular periodic payment. If a payment is not itself a regular periodic payment and is more than two times any one regular periodic payment during the loan term, then it is disclosed as a balloon payment under § 1026.37(b)(5). The regular periodic payments used to determine whether a payment is a balloon payment under § 1026.37(b)(5) are the payments of principal and interest (or interest only, depending on the loan features) specified under the terms of the loan contract that are due from the consumer for two or more unit-periods in succession. All regular periodic payments during the loan term are used to determine whether a particular payment is a balloon payment, regardless of whether the regular periodic payments have changed during the loan term due to rate adjustments or other payment changes permitted or required under the loan contract.

i. For example, assume that, under a 15-year step rate mortgage, the loan contract provides for scheduled monthly payments of $300 each during the years one through three and scheduled monthly payments of $700 each during years four through 15. If an irregular payment of $1,000 is scheduled during the final month of year 15, that payment is disclosed as a balloon payment under § 1026.37(b)(5), because it is more than two times the regular periodic payment amount of $300 during years one through three. This is the case even though the irregular payment is not more than two times the regular periodic payment of $700 per month during years four through fifteen. The $700 monthly payments during years four through fifteen are not balloon payments even though they are more than two times the regular periodic payments during years one through three, because they are regular periodic payments.

ii. If the loan has an adjustable rate under which the regular periodic payments may increase after consummation, but the amounts of such payment increases (if any) are unknown at the time of consummation, then the regular periodic payments are based on the fully-indexed rate, except as otherwise determined by any premium or discounted rates, the application of any interest rate adjustment caps, or any other known, scheduled rates under the terms specified in the loan contract. For analogous guidance, see comments 17(c)(1)-8 and -10. Similarly, if a loan has an adjustable interest rate which does not adjust the regular periodic payment but would, if the rate increased, increase only the final payment, the amount of the final payment for purposes of the balloon payment determination is based on the fully-indexed rate, except as otherwise determined by any premium or discounted rate caps, or any other known, scheduled rates under the terms specified in the loan contract. For example, assume that, under a 30-year adjustable rate mortgage, (1) the loan contract requires monthly payments of $300 during years one through five, (2) the loan contract permits interest rate increases every three years starting in the sixth year up to the fully-indexed rate, subject to caps on interest rate adjustments specified in the loan contract, (3) based on the application of the interest rate adjustment caps, the interest rate may increase to the fully-indexed rate starting in year nine, and (4) the monthly payment based on the fully-indexed rate is $700. The regular periodic payments during years one through five are $300 per month, because they are known and scheduled. The regular periodic payments during years six through eight are up to $700 per month, based on the fully-indexed rate but subject to the application of interest rate adjustment caps specified under the loan contract. The regular periodic payments during years nine through thirty are $700, based on the fully-indexed rate. Therefore, if an irregular payment of $1,000 is scheduled during the final month of year 30, that payment is disclosed as a balloon payment under § 1026.37(b)(5), because it is more than two times the regular periodic payment amount of $300 during years one through five. This is the case even though the irregular payment is not more than two times the regular periodic payment during years nine through thirty (i.e., based on the fully-indexed rate). However, the regular periodic payments during years six through thirty themselves are not balloon payments, even though they may be more than two times the regular periodic payments during years one through five.

iii. For a loan with a negative amortization feature, the regular periodic payment does not take into account the possibility that the consumer may exercise an option to make a payment greater than the scheduled periodic payment specified under the terms of the loan contract, if any.

iv. A final payment that differs from other regular periodic payments because of rounding to account for payment amounts including fractions of cents is still a regular periodic payment and need not be disclosed as a balloon payment under § 1026.37(b)(5).

v. The disclosure of balloon payments in the “Projected Payments” table under § 1026.37(c) is governed by that section and its commentary, rather than § 1026.37(b)(5), except that the determination, as a threshold matter, of whether a payment disclosed under § 1026.37(c) is a balloon payment is made in accordance with § 1026.37(b)(5) and its commentary.

2. Single and double payment transactions. The definition of a “balloon payment” under § 1026.37(b)(5) includes the payments under transactions that require only one or two payments during the loan term, even though a single payment transaction does not require regular periodic payments, and a transaction with only two scheduled payments during the loan term may not require regular periodic payments.

(6) Adjustments after consummation. For each amount required to be disclosed by paragraphs (b)(1) through (3) of this section, a statement of whether the amount may increase after consummation as an affirmative or negative answer to the question, and under such question disclosed as a subheading, “Can this amount increase after closing?” and, in the case of an affirmative answer, the following additional information, as applicable:

1. Periods not in whole years. For guidance on how to disclose increases after consummation that occur after a number of months less than 24 but that do not equate to a number of whole years or within a number of days less than a week, see the guidance provided in comment 37(a)(10)-3. For increases that occur after more than 24 months, see the guidance provided in comment 37(b)(8)-1.

(i) Adjustment in loan amount. The maximum principal balance for the transaction and the due date of the last payment that may cause the principal balance to increase. The disclosure further shall indicate whether the maximum principal balance is potential or is scheduled to occur under the terms of the legal obligation.

1. Additional information regarding adjustment in loan amount. A creditor complies with the requirement under § 1026.37(b)(6)(i) to disclose additional information indicating whether the maximum principal balance is potential or is scheduled to occur under the terms of the legal obligation by using the phrase “Can go as high as” or “Goes as high as,” respectively. A creditor complies with the requirement under § 1026.37(b)(6)(i) to disclose additional information indicating the due date of the last payment that may cause the principal balance to increase by using the phrase “Increases until.” See form H-24 of appendix H to this part for the required format of such phrases, which is required for federally related mortgage loans under § 1026.37(o)(3).

(ii) Adjustment in interest rate. The frequency of interest rate adjustments, the date when the interest rate may first adjust, the maximum interest rate, and the first date when the interest rate can reach the maximum interest rate, followed by a reference to the disclosure required by paragraph (j) of this section. If the loan term, as defined under paragraph (a)(8) of this section, may increase based on an interest rate adjustment, the disclosure required by this paragraph (b)(6)(ii) shall also state that fact and the maximum possible loan term determined in accordance with paragraph (a)(8) of this section.

1. Additional information regarding adjustment in interest rate. A creditor complies with the requirement under § 1026.37(b)(6)(ii) to disclose additional information indicating the frequency of adjustments to the interest rate and date when the interest rate may first adjust by using the phrases “Adjusts every” and “starting in.” A creditor complies with the requirement under § 1026.37(b)(6)(ii) to disclose additional information indicating the maximum interest rate, and the first date when the interest rate can reach the maximum interest rate using the phrase “Can go as high as” and then indicating the date at the end of that phrase or for a scheduled maximum interest rate under a step rate loan, “Goes as high as.” If the loan term may increase based on an interest rate adjustment, the disclosure shall indicate the maximum possible loan term using the phrase “Can increase loan term to.” See form H-24 of appendix H to this part for the required format of such phrases, which is required for federally related mortgage loans under § 1026.37(o)(3).

2. Interest rates that adjust at multiple intervals. If the terms of the legal obligation provide for more than one adjustment period, § 1026.37(b)(6)(ii) requires disclosure of only the frequency of the first interest rate adjustment. For example, if the interest rate is fixed for five years, then adjusts every two years starting in year six, then adjusts every year starting in year 10, the disclosure required is “Adjusts every 2 years starting in year 6.”

(iii) Increase in periodic payment. The scheduled frequency of adjustments to the periodic principal and interest payment, the due date of the first adjusted principal and interest payment, the maximum possible periodic principal and interest payment, and the date when the periodic principal and interest payment may first equal the maximum principal and interest payment. If any adjustments to the principal and interest payment are not the result of a change to the interest rate, a reference to the disclosure required by paragraph (i) of this section. If there is a period during which only interest is required to be paid, the disclosure required by this paragraph (b)(6)(iii) shall also state that fact and the due date of the last periodic payment of such period.

1. Additional information regarding increase in periodic payment. A creditor complies with the requirement under § 1026.37(b)(6)(iii) to disclose additional information indicating the scheduled frequency of adjustments to the periodic principal and interest payment by using the phrases “Adjusts every” and “starting in.” A creditor complies with the requirement under § 1026.37(b)(6)(iii) to disclose additional information indicating the maximum possible periodic principal and interest payment, and the date when the periodic principal and interest payment may first equal the maximum principal and interest payment by using the phrase “Can go as high as” and then indicating the date at the end of that phrase or, for a scheduled maximum amount, such as under a step payment loan, “Goes as high as.” A creditor complies with the requirement under § 1026.37(b)(6)(iii) to indicate that there is a period during which only interest is required to be paid and the due date of the last periodic payment of such period using the phrase “Includes only interest and no principal until.” See form H-24 of appendix H to this part for the required format of such phrases, which is required for federally related mortgage loans under § 1026.37(o)(3). See comment app. D-7.iv for an explanation of the disclosure of an increase in the periodic payment for a construction or construction-permanent loan.

2. Periodic principal and interest payments that adjust at multiple intervals. If there are multiple periods of adjustment under the terms of the legal obligation, § 1026.37(b)(6)(iii) requires disclosure of the frequency of only the first adjustment to the periodic principal and interest payment, regardless of the basis for the adjustment. Accordingly, where the periodic principal and interest payment may change because of more than one factor and such adjustments are on different schedules, the frequency disclosed is the adjustment of whichever factor adjusts first. For example, where the interest rate for a transaction is fixed until year six and then adjusts every three years but the transaction also has a negative amortization feature that ends in year seven, § 1026.37(b)(6)(iii) requires disclosure that the interest rate will adjust every three years starting in year six because the periodic principal and interest payment adjusts based on the interest rate before it adjusts based on the end of the negative amortization period.

(7) Details about prepayment penalty and balloon payment. The information required to be disclosed by paragraphs (b)(4) and (5) of this section shall be disclosed as an affirmative or negative answer to the question, and under such question disclosed as a subheading, “Does the loan have these features?” If an affirmative answer for a prepayment penalty or balloon payment is required to be disclosed, the following information shall be included, as applicable: